Skip to content
Fitly Parts
FP-F5611A9C

Oxygen O2 Sensor Set 4-Pack compatible with GMC Savana 2500, Savana 3500 2003-2007

Oxygen O2 Sensor Set (4 Pack) for GMC Savana 2500
No reviews yet
Oxygen Sensors
For GMC Savana 2500 +1 more
Fits model years 2003–2007

More than just the part

Included in the price
  • 2x Upstream (234-4285)
  • 2x Downstream (234-4651)
Skill levelAdvanced · mechanical experience needed

This set of four oxygen sensors features stainless steel housings for durability and corrosion resistance. The sensors come with pre-coated anti-seize lubricant on the threads for a faster and easier installation process.

Key facts

Part type
Oxygen Sensor
Type
Aftermarket replacement

Compatibility matrix

Only models verified by our team are listed
This one part fits every model listed below. No need to open each model, just add this item to your cart.
Parts forModelThis part
GmcGMC Savana 2500 Fits
GMC Savana 3500 Fits

Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.

Where to find your model number

  • Gmc: Use your 17-character VIN. It's on the driver-side dashboard at the base of the windshield and on the driver's door jamb sticker. The year is in the 10th character. Also check your registration or the owner's manual.

General manufacturer guidance: exact label position can vary by model.

Oxygen Sensor specifications

Material
Metal
Wire Quantity
4
Package Includes
2x Upstream (234-4285), 2x Downstream (234-4651)

Installation guide - Replacing an engine or wheel sensor

General guidance for this part type - always follow your device manual
Tools
  • Socket set (oxygen sensors need an O2 sensor socket)
  • Penetrating oil
  • OBD2 scanner
Tips
  • If the same code returns, check the connector and wiring before suspecting the new sensor.
  1. 1Make it safe. Engine off and cool (exhaust parts stay hot for a long time). Raise the car on axle stands if the sensor is underneath.
  2. 2Follow the wire. Trace the sensor's wire to its connector, unplug it and unclip the wire from its holders, noting the route.
  3. 3Remove the old sensor. Soak rusty threads with penetrating oil first. Oxygen sensors unscrew with the O2 socket; wheel speed and crank sensors usually have one bolt and twist out. Clean rust from the mounting hole.
  4. 4Fit the new sensor. Keep anti-seize off an oxygen sensor's tip (new ones often come pre-coated on the threads). Lightly oil an O-ring, seat the sensor fully and route the wire through the original clips, away from hot or moving parts.
  5. 5Clear codes and test. Reconnect, clear the fault codes with an OBD2 scanner and drive to check the warning light stays off.

This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.

Maintenance check

Signs it's time to replace

  1. 01Check engine light is on with an oxygen sensor code
  2. 02Fuel economy drops
  3. 03Rough idle or hesitation
  4. 04Failed emissions test

More parts for GMC Savana 2500

See all GMC Savana 2500 parts
Radiator compatible with Chevrolet Express 2500, Express 3500, Express 4500; GMC Savana 2500, Savana 3500, Savana 4500FP-70015D
Fits 6 models
For Chevrolet Express 2500, Express 3500
Radiator 2500, 3500, 4500;
$340.99

12 month warranty on every part

Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.

Warranty & returns policy

Customer reviews

No reviews yet

Bought this part? Be the first to share how it fit and how it held up.

Questions & answers

+Which models does this oxygen sensor fit?

Our team verified it for GMC Savana 2500, GMC Savana 3500. The full list is in the compatibility table above.

+Which model years does it fit?

Verified for model years 2003–2007. Check the year of your vehicle in the table above.

+How do I make sure it fits my exact model?

Find the model number on your vehicle registration or VIN and compare it with the table above. Our fit guarantee covers verified models.

+What's in the box?

Pack size: 4-Pack, as listed for this part. Check the photos and specifications for the exact contents.

+What is the oxygen sensor made of?

Listed material: Metal.

+Is it hard to install?

Install difficulty: Advanced · mechanical experience needed. Step by step instructions are on this page.

+How fast will it arrive?

This part is in stock in the USA: delivery within 3 to 8 business days, free shipping in the US.

+Is there a warranty?

Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.

$102.99
1