Skip to content
Fitly Parts
FP-500B636A

Universal Gas Strut Spring Supports for Car Trunk and Bonnet 400N 2-Pack

400N Universal Gas Strut Spring Supports
No reviews yet
2-packTrunk Struts
Skill levelModerate · basic hand tools

A pair of heavy-duty 400N gas struts made from steel with a corrosion-resistant rod finish.

Key facts

Part type
Trunk Struts
Included
2-pack
Type
Aftermarket replacement

Compatibility matrix

Only models verified by our team are listed
Fit unconfirmedNo exact-model compatibility has been confirmed for this part.

To see if it fits your vehicle, compare these published specifications with your original part:

Force
400N
Length (Center to Center)
300mm-600mm
Material
Steel
Ball Joint Connection
10mm
Technology
Dynamic damping / Leak-proof piston seal

Not sure? Send us your exact model number and we will confirm the fit before you order.

We have not confirmed a model list for this part yet. Match it with the published specifications above, or send us your exact model number and we will confirm before you order.

Trunk Struts specifications

Force
400N
Length (Center to Center)
300mm-600mm
Material
Steel
Ball Joint Connection
10mm
Technology
Dynamic damping / Leak-proof piston seal

Installation guide - Replacing lift supports (gas struts)

General guidance for this part type - always follow your device manual
Tools
  • Prop rod, broom handle or a helper
  • Small flat screwdriver
Tips
  • Replace both struts together so the lid lifts evenly.
  • Never puncture or heat an old gas strut; recycle it.
  1. 1Prop the lid. Engine off. Open the hood, trunk or tailgate fully and prop it securely, since it will drop once a strut is removed.
  2. 2Release the old strut. Lift the small spring clip on each end socket slightly with a flat screwdriver (do not pull it out) and pull that end off its ball stud.
  3. 3Check orientation. Fit the new strut the same way round as the old one; most are fitted with the thin rod end pointing down.
  4. 4Fit the new strut. Press each end onto its ball stud until it snaps on. Replace the second strut the same way.
  5. 5Test. Remove the prop and open and close the lid a few times to check it holds and closes smoothly.

This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.

Maintenance check

Signs it's time to replace

  1. 01Hood, trunk or liftgate will not stay open
  2. 02Lid drops slowly or must be held up
  3. 03Oil leaking from the strut

12 month warranty on every part

Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.

Warranty & returns policy

Customer reviews

No reviews yet

Bought this part? Be the first to share how it fit and how it held up.

Questions & answers

+Which models has your team verified?

None yet. The title shows the models this part is designed for, but our team hasn't confirmed the fit. Compare the part with your old one before ordering.

+What's in the box?

Pack size: 2-pack, as listed for this part. Check the photos and specifications for the exact contents.

+What is the trunk struts made of?

Listed material: Steel.

+Is it hard to install?

Install difficulty: Moderate · basic hand tools. Step by step instructions are on this page.

+How fast will it arrive?

US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.

+Is there a warranty?

Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.

$84.99
1