Skip to content
Fitly Parts
FP-A5E8A98F

Battery (2400mAh, 3.6V) 10-Pack compatible with Sony PSP-2000 and PSP-3000 Series

Battery (2400mAh, 3.6V)
No reviews yet
10-packConsole Parts
Skill levelModerate · basic hand tools

Features overheat and overcharge protection for extended gaming life.

Key facts

Part type
Console Battery
Included
10-pack
Type
Aftermarket replacement

Compatibility matrix

Only models verified by our team are listed
This one part fits every model listed below. No need to open each model, just add this item to your cart.
Parts forModelThis part
SonySony PSP-2010 Fits
Sony PSP-2003 Fits
Sony PSP-3003 Fits
Sony PSP 3000 Fits
Sony PSP-2007 Fits
Sony PSP-3008 Fits
Sony PSP-2005 Fits
Sony PSP-2006 Fits
Sony PSP-3006 Fits
Sony PSP-3007 Fits

Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.

Where to find your model number

  • Sony: Usually on the rating label under or on the back of the device. Your owner's manual also lists the model number.

General manufacturer guidance: exact label position can vary by model.

Console Battery specifications

Capacity
2400mAh
Voltage
3.6V
Chemistry
Li-ion
Certification
CE

Installation guide - Replacing a console or controller battery

General guidance for this part type - always follow your device manual
Tools
  • Tri-wing or Phillips screwdriver as your console uses
  • Plastic spudger and plastic card
  • Isopropyl alcohol for glued batteries
Tips
  • If the old battery is swollen, do not press, bend or puncture it. Tape over its contacts and take it to a battery recycling point; never put it in household trash.
  1. 1Switch fully off. Turn the console or controller completely off, not into sleep mode.
  2. 2Open the back. Remove the back screws and lift the back cover off; controllers often have hidden clips along the grips.
  3. 3Disconnect the old battery. Pull its plug straight out of the socket by the plug body, or lift it with the spudger. Never pull on the wires.
  4. 4Swap the battery. Glued batteries (as in many handhelds) need isopropyl alcohol around the edges and a plastic card to lift; clip in batteries simply lift out. Fit the new one the same way round.
  5. 5Close and charge. Connect the new battery, close the case and charge to full. Check that the battery level shows correctly.

This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.

Maintenance check

Signs it's time to replace

  1. 01Much shorter run time per charge
  2. 02Device will not hold a charge or shuts off early
  3. 03Battery gets unusually hot
  4. 04Swelling or leaking (stop using it)

12 month warranty on every part

Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.

Warranty & returns policy

Customer reviews

No reviews yet

Bought this part? Be the first to share how it fit and how it held up.

Questions & answers

+Which models does this console battery fit?

Our team verified it for Sony PSP-2010, Sony PSP-2003, Sony PSP-3003, Sony PSP 3000, Sony PSP-2007, Sony PSP-3008 and 11 more. The full list is in the compatibility table above.

+How do I make sure it fits my exact model?

Find the model number on your device label and compare it with the table above. Our fit guarantee covers verified models.

+What's in the box?

Pack size: 10-pack, as listed for this part. Check the photos and specifications for the exact contents.

+What is the battery capacity?

Listed capacity: 2400mAh. A capacity that differs from your original changes run time, not fit.

+What battery chemistry is it?

Listed type: Li-ion. Replace with the same chemistry as your original battery.

+What voltage does it use?

Listed voltage: 3.6V. It must match the voltage of your original part.

+Does it have any certifications?

Listed certification: CE, as stated by the manufacturer.

+Is it hard to install?

Install difficulty: Moderate · basic hand tools. Step by step instructions are on this page.

+How fast will it arrive?

US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.

+Is there a warranty?

Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.

$101.99
1