2-Piece 36T Carbide Tip Brush Cutter Blades compatible with Stihl Fsx
Key facts
- Part type
- Brush Cutter Blades
- Included
- 2-pack
- Type
- Aftermarket replacement
Compatibility matrix
Only models verified by our team are listed| Parts for | Model | This part |
|---|---|---|
| Stihl | Stihl Fsx | Fits |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Stihl: Usually on the rating label under or on the back of the device. Your owner's manual also lists the model number.
General manufacturer guidance: exact label position can vary by model.
Brush Cutter Blades specifications
- Teeth
- 36T
- Material
- Carbide Tip
Installation guide - Replacing a brush
General guidance for this part type - always follow your device manual- Small screwdriver, only if the brush is screwed on
- Side brushes are often marked L and R; fitting them on the wrong side makes them flick dirt away.
- 1Switch off. Power the device down (robot vacuums: main switch off) and turn it over onto a soft surface.
- 2Remove the old brush. Pull it straight off its post, or undo the single screw at its center.
- 3Clean the post. Remove wrapped hair and fluff from the post and around it; hair here makes a brush slow down.
- 4Fit the new brush. Press it on, matching the left and right markings (L/R) if your brushes have them, and refit any screw.
- 5Check it spins. Turn the brush by hand to confirm it rotates freely before running the device.
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
12 month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.
Customer reviews
No reviews yet
Bought this part? Be the first to share how it fit and how it held up.
Questions & answers
+Which models does this brush cutter blades fit?
Our team verified it for Stihl Fsx. The full list is in the compatibility table above.
+How do I make sure it fits my exact model?
Find the model number on your device label and compare it with the table above. Our fit guarantee covers verified models.
+What's in the box?
Pack size: 2-pack, as listed for this part. Check the photos and specifications for the exact contents.
+What is the brush cutter blades made of?
Listed material: Carbide Tip.
+Is it hard to install?
Install difficulty: Moderate · basic hand tools. Step by step instructions are on this page.
+How fast will it arrive?
US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.
+Is there a warranty?
Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.