Really good screen for the price . fairly straight forward to fit . if you are able to remove the old screen you can certainly fit the new one it’s that simple . the torch sensor was abit flappy in the case so i used a clear bit of rubber to keep it tight to the top of the case. sensor works every time now . colour and brightness is good brings this 90s handheld into the modern era
IPS LCD Screen Kit with White Lens (2.6 Inch) compatible with Nintendo Game Boy Color

A 2.6-inch high-brightness IPS LCD screen featuring point-to-point display and black-and-white style options. Includes a white glass lens with logo and touch-sensitive brightness and style controls. Requires minor shell modification for installation.
Key facts
- Part type
- IPS LCD Screen Kit
- Type
- Aftermarket replacement
Compatibility matrix
Only models verified by our team are listed| Parts for | Model | This part |
|---|---|---|
| Nintendo | Nintendo Game Boy Color | Fits |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Nintendo: Usually on the rating label under or on the back of the device. Your owner's manual also lists the model number.
General manufacturer guidance: exact label position can vary by model.
IPS LCD Screen Kit specifications
- Screen Type
- IPS LCD
- Screen Size
- 2.6 inch
- Compatibility
- Nintendo Game Boy Color
- Display Modes
- Point-to-point, Black and White style
- Control Method
- Touch sensing cable / Push button
- Brightness
- Adjustable high brightness
Installation guide - Fitting a handheld console screen kit
General guidance for this part type - always follow your device manual- Tri-wing and Phillips screwdrivers (Nintendo handhelds use tri-wing)
- Plastic spudger
- Soldering iron, only if your kit requires it
- Check whether your kit is drop in or needs soldering or shell trimming before you start.
- Dust trapped under the screen lens shows on the picture; clean with a lint free cloth before closing.
- 1Prepare. Switch the console off and remove its batteries or disconnect the internal battery, plus any game cart or memory card.
- 2Open the shell. Lay the console face down, remove all back screws and lift the back off. Keep the shell face down so the buttons and rubber pads stay in place.
- 3Remove the old screen. Lift the lock on the screen ribbon and slide it out, then unscrew or unclip the old screen from the board or shell.
- 4Fit the new screen. Seat the new ribbon fully under its lock. Some kits also need wires soldered for brightness control or a lightly trimmed shell; follow the kit's own diagram for those points.
- 5Test before closing. Power on to check picture, brightness and buttons, then close the shell and tighten the plastic screws only until snug.
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
12 month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.
Customer reviews
I like it
Works very well. The LCD screen and glass are a bit difficult to align together with the adhesive. It takes several attempts.
| Rating | Reviewer | Review | Date |
|---|---|---|---|
| A. | Really good screen for the price . fairly straight forward to fit . if you are able to remove the old screen you can certainly fit the new one it’s that simple . the torch sensor was abit flappy in the case so i used a clear bit of rubber to keep it tight to the top of the case. sensor works every time now . colour and brightness is good brings this 90s handheld into the modern era | Jun 23, 2026 | |
| J. | I like it | May 2, 2026 | |
| H. | Works very well. The LCD screen and glass are a bit difficult to align together with the adhesive. It takes several attempts. | Jan 17, 2026 |
Questions & answers
+Which models does this ips lcd screen kit fit?
Our team verified it for Nintendo Game Boy Color. The full list is in the compatibility table above.
+How do I make sure it fits my exact model?
Find the model number on your device label and compare it with the table above. Our fit guarantee covers verified models.
+What screen type and size is it?
Listed: IPS LCD. Choose the same screen type as your original.
+Is it hard to install?
Install difficulty: Advanced · mechanical experience needed. Step by step instructions are on this page.
+How fast will it arrive?
US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.
+Is there a warranty?
Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.























