Skip to content
Fitly Parts
FP-FCD87EE3

Waterproof Tail Lights 12V 10-LED 2-Pack compatible with Dodge Caravan

12V 10-LED Waterproof Tail Lights for Dodge Caravan
No reviews yet
2-packTail Lights
For Dodge Caravan
Skill levelModerate · basic hand tools

Features 10 high-brightness LEDs per unit and provides stop, tail, and indicator functions.

Key facts

Part type
Tail Light Assembly
Included
2-pack
Type
Aftermarket replacement

Compatibility matrix

Only models verified by our team are listed
This one part fits every model listed below. No need to open each model, just add this item to your cart.
Parts forModelThis part
DodgeDodge Caravan Fits

Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.

Where to find your model number

  • Dodge: Use your 17-character VIN. It's on the driver-side dashboard at the base of the windshield and on the driver's door jamb sticker. The year is in the 10th character. Also check your registration or the owner's manual.

General manufacturer guidance: exact label position can vary by model.

Tail Light Assembly specifications

Material
Plastic
Waterproof Rating
IP65
Voltage
12V
LED Quantity
10 LEDs each light
Dimensions
158mm x 80mm x 30mm
Wire Length
350mm
Mounting Hole Distance
10cm

Installation guide - Replacing a tail light assembly

General guidance for this part type - always follow your device manual
Tools
  • Socket set or nut driver
  • Plastic trim tool
  • Masking tape
Tips
  • Check for water marks in the trunk later; a gap in the gasket lets water in.
  1. 1Make it safe. Engine off, lights off. Open the trunk or tailgate.
  2. 2Reach the fixings. Remove the access cover or trim panel inside the trunk behind the lamp; the nuts are on the back of the lamp. Some lamps also have screws on the edge facing the open tailgate.
  3. 3Remove the old lamp. Unplug the connector by pressing its tab, undo the nuts and pull the lamp straight back. Put tape on the paint around the lamp first; ball clips need a firm, wiggling pull.
  4. 4Fit the new lamp. Move the bulbs across if the new lamp has none, check its gasket is seated, push it onto the studs and tighten the nuts snug, not hard, since the housing is plastic.
  5. 5Test every function. With a helper, check tail, brake, turn, reverse and hazard lights before refitting the trim.

This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.

Maintenance check

Signs it's time to replace

  1. 01Light is out, dim or flickering
  2. 02Cracked, foggy or yellowed lens
  3. 03Moisture or water inside the housing
  4. 04Dashboard bulb-out warning

More parts for Dodge Caravan

See all Dodge Caravan parts
Liftgate Lift Support Struts compatible with Dodge CaravanFP-2563C2×2
For Dodge Caravan
Liftgate Lift Support Struts
$54.99
6 TPMS Sensors compatible with Dodge CaravanFP-5117F1×6
For Dodge Caravan
TPMS Sensors 6
$48.99

12 month warranty on every part

Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.

Warranty & returns policy

Customer reviews

No reviews yet

Bought this part? Be the first to share how it fit and how it held up.

Questions & answers

+Which models does this tail light assembly fit?

Our team verified it for Dodge Caravan. The full list is in the compatibility table above.

+How do I make sure it fits my exact model?

Find the model number on your vehicle registration or VIN and compare it with the table above. Our fit guarantee covers verified models.

+What's in the box?

Pack size: 2-pack, as listed for this part. Check the photos and specifications for the exact contents.

+What voltage does it use?

Listed voltage: 12V. It must match the voltage of your original part.

+Is it waterproof?

Listed water rating: IP65.

+What is the tail light assembly made of?

Listed material: Plastic.

+What are the dimensions?

Listed size: 158mm x 80mm x 30mm. Measure your old tail light assembly to compare.

+Is it hard to install?

Install difficulty: Moderate · basic hand tools. Step by step instructions are on this page.

+How fast will it arrive?

US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.

+Is there a warranty?

Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.

$23.99
1