Skip to content
Fitly Parts
FP-8F29007D

Universal 10-Inch Sediment Water Filter (1 & 5 Micron) 10-Pack

Universal 10-Inch Sediment Water Filter (1 & 5 Micron)
No reviews yet
10-packReverse Osmosis Filters
Skill levelEasy · no tools, a few minutes

Effectively removes rust, sludge, and coarse particles using food-grade polypropylene material.

Key facts

Part type
Sediment Water Filter
Included
10-pack
Type
Aftermarket replacement

Compatibility matrix

Only models verified by our team are listed
Fit unconfirmedNo exact-model compatibility has been confirmed for this part.

To see if it fits your vehicle, compare these published specifications with your original part:

Height
254mm
Inner Diameter
28mm
Outer Diameter
60mm
Material
Food grade polypropylene
Micron Rating
1 and 5 Micron

Not sure? Send us your exact model number and we will confirm the fit before you order.

We have not confirmed a model list for this part yet. Match it with the published specifications above, or send us your exact model number and we will confirm before you order.

Sediment Water Filter specifications

Height
254mm
Inner Diameter
28mm
Outer Diameter
60mm
Material
Food grade polypropylene
Micron Rating
1 and 5 Micron

Installation guide - Replacing a water filter

General guidance for this part type - always follow your device manual
Tools
  • Towel to catch drips
Tips
  • Pitcher filters: rinse, seat firmly in the reservoir and discard the first fills.
  • Discard the first ice batch after a filter change.
  1. 1Find the filter. Refrigerator filters sit inside the fridge (often top right), in the bottom grille or at the back. Put a towel underneath.
  2. 2Remove the old filter. Most turn a quarter turn counterclockwise and pull out; some release with a push button first.
  3. 3Fit the new filter. Remove its cap, line up the arrow with the mark on the housing, push it in and turn clockwise until it stops and locks.
  4. 4Flush the filter. Dispense water into a jug and discard it until it runs clear and steady. Spluttering at first is trapped air and is normal.
  5. 5Check and reset. Look for drips around the housing, then reset the filter light as your fridge manual describes.

This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.

Maintenance check

Signs it's time to replace

  1. 01Water or ice tastes or smells bad
  2. 02Water dispenser flow is slow
  3. 03Filter indicator light is on
  4. 04Ice cubes are small, cloudy or hollow

12 month warranty on every part

Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.

Warranty & returns policy

Customer reviews

No reviews yet

Bought this part? Be the first to share how it fit and how it held up.

Questions & answers

+Which models has your team verified?

None yet. The title shows the models this part is designed for, but our team hasn't confirmed the fit. Compare the part with your old one before ordering.

+What's in the box?

Pack size: 10-pack, as listed for this part. Check the photos and specifications for the exact contents.

+What is the sediment water filter made of?

Listed material: Food grade polypropylene.

+Is it hard to install?

Install difficulty: Easy · no tools, a few minutes. Step by step instructions are on this page.

+How fast will it arrive?

US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.

+Is there a warranty?

Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.

$79.99
1